JMDA809 Mini
Maori Bone Carvings
Applique
Wall Hangings
Each
individual panel is 12 x 18 cm (5 x 7 inches)
If placed all 3 on one panel then total Size: 66 x 36cm (26 x14 inches)
Each carving has a
buttonhole stitched edging and is embellished with a wool edging,
reminiscent of the feather edging on Maori cloaks. The designs are also
embellished with metallic stitching and beading.
All of
this can be machine stitched if you wish.
Each individual
panel is quilted. The actual
carving lines are created by easy hand stitching.
These applique designs are based on New Zealand Maori Bone Carvings. Each of
the above carvings are commonly worn as pendants. Like all Maori design they
each tell a story. The meaning or beliefs of the designs can vary between
each tribe. The grouping of 3 lines in the actual carving represents bring
united: Whanau (family), Hapu (sub-tribe) and Iwi (tribe).
Looking at the top wall hanging photo from left:
Meaning Strength: Represented by the traditional fish hook
(Hei-Matau). The strength relating
to the strength needed by Maui in the Maori legend who pulled the
North Island of New Zealand from the ocean. Also it is said to bring luck
and safety to those traveling over water and traveling.
Meaning Energy: This is represented by a Mania that has a bird like head and fish tale.
It some times has a human body.
This carving represents the energy of ones spirituality. The carving design
is made from many things combined just like a combination of things that
make our spirituality.
Meaning Growth: This is shown
by the Koru(s) (fern frond) in the centre unfurling. Our lives are like the
koru that slowly unfurls as we grow mentally, physically and spiritually;
bringing tranquility and peace.
Included in
design pack is:
Comprehensive
step by
step
piecing and stitching
Instructions. Step by step stitch glossary. Full sized
pattern pieces.
Shopping list of fabrics etc.
Suitable for those new to
applique. Instructions are for hand
stitched
non-turned
Buttonhole stitched
applique
edging,
but instructions for slip stitched turned edges and non-turned
machining are given.
All instructions include metric and imperial
measurements.
